53
Figure 2. Leg assembly with washer fitted correctly. The lower
part of the leg will unscrew to adjust the height and level of the
cooker.
Figure 3. Leg insert cut out on base of oven. To fit the legs to
the appliance lie the cooker flat on its back and fit all four legs.
DO NOT fit legs to the cooker by tilting the appliance, doing so
may damage the leg assembly.
Figure 4. Insert washer fitted to top of leg into base of cooker
and slide the leg along the channel.
Figure5. Screw the leg up tight so the oven base is clamped
between the washer and the top of the leg. Once all four legs
have been fitted lift cooker onto the legs taking care to distribute
the weight evenly onto all four legs at the same time.
DO NOT tip the appliance onto its legs, always lift the appliance
onto its legs. (This will require two people)
For the installation anchor the cooker by using the supplied kit referring to the relevant drawing.
We provides two brackets, which will serve to anchor the wall-terminal of the cooker. We must
fix the brackets to the wall, following the instructions of the drawings. We must then slightly lift
the cooker to let in the bracket on the crease of the wall-terminal or working top cooker.
