95
ENG
5.11 Vitroceramic cooking hob
(Applicable models only)
Switching on
The control is switched on by pressing ( x sec.)
the on/off key
a beep sounds.
It will not come on if the key lock
function
is activated (indicated by a pilot light).
The heaters remain off (all the digits show 0)
until a power level is selected. If the selection
is not made in 10 seconds, and if the timers are
off, the control turns off automatically.
Selecting a power level for a certain heater
With the control on, the first time the sensor
(+) is pressed ( x sec), the heater switches on at
level 1 by default (configurable).
The sensor (+) raises the cooking level to a
maximum of 9, whereas the sensor (-) reduces
the cooking level to 0 (heater off).
With the heater at position 0, the sensor (-)
raises the cooking level to 9.
If the sensor is held down, the action is repated
twice every second.
Activating the heat-up function
This function takes the cooking level to
maximum power for a defined time.
The heat-up function is activated selecting
the power level 9, and touching the (+) key.
The decimal point of the display blinks for 10
seconds.
During these 10 seconds the desired power
level must be selected (between 1 and 8). After
this time a beep sounds, and the decimal point
remains fixed, indicating the heat-up function
is ON. If the power level is 0 or 9, the heat-up
function is cancelled.
If the heat-up function is activated, pressing
the heater (+) key, the duration of the heat-up
function will be the duration for the new power
level; if the new level is 9, the heat up function
is cancelled.
The Heat-up function can be cancelled either
automatically, when the time expires, or when
the user wishes.
When the heat-up function is cancelled
automatically, a beep sounds, the decimal point
of the display turns out, and the power level of
the heater remains the selected power level.
If we press the (-) key when the heat-up function
is activated, the function is cancelled.
Power Level
Time (sec.)
1
1’12”
2
2’44”
3
4’48”
4
5’28”
5
6’30”
6
1’12”
7
2’44”
8
2’44”
Key loc
Holding the key lock sensor
down turns
the key lock function on or off. If the pilot light
associated with the
key lock sensor is on, the keypad is locked.
The locking function can be activated when the
cooking levels are activated or when the cook
top is off. If the cook top is on, the key lock
function locks all the sensors except the general
on/off sensor and the key lock. When the cook
top is off, the key lock function locks all the
sensors, including the general on/off, except
the key lock.
