101
ENG
7. WARRANTY
This warranty certificate drawn up by Nuova Lofra Sr.l., based in Torreglia (PD), Via Montegrotto
125; refers to the terms of the Conventional Warranty of the Producer to the consumer and these
conditions do not affect and are in accordance with the rights recognized to the Consumer by the
Legislative Decree of February 2, 2002, No. 24 issued in implementation of Directive 1999/44 / EC of
the European Parliament , as well as by Legislative Decree 6 September 2005 n.206.
GLOW PLUGS OPERATING INSTRUCTIONS
(ONLY ON SELECTED MODELS)
To switch the gas jets on press the knob and
turn it anti-clockwise; the glow plug will turn
bright red and cause the gas jet’s flame to light.
WARNING
It is reccomended not to leave any
inflammable materials on top of the
kitchen’s work surface, such as cloths and
grease proof paper, which could catch fire
just by pressing the knob, even when the gas
jets are switched off.
Make sure every precaution is taken; by
pressing the knobs the glow plugs will
immediately turn on and reach 1300° in
temperature.
The glow plugs must not be knocked to avoid
damaging them.
TO AVOID BURNS AND INJURIES THE GLOW
PLUGS MUST NOT BE TOUCHED WHEN THEY
ARE BRIGHT RED. CHILDREN MUST BE KEPT
AT A SAFE DISTANCE.
6. CLEANING
Before cleaning turn off at the mains and leave the oven and burners to cool.
Clean the hob and oven after each use in order to prevent build-ups of stubborn dirt that are difficult
to remove and may damage the surfaces.
To clean the stainless steel, enamelled, and glass parts and the control panel, we recommend using
a sponge or damp cloth with a non-abrasive cleaner. If spots are difficult to take off, please use
specific cleaning products.
Rinse and dry carefully after the cleaning. Do not use steel wool, abrasive powders and corrosive
substances that could scratch.
To keep the internal enamelled parts shiny for a long time, they should be cleaned frequently with
warm soapy water.
The grid guides and drip pan can be removed by unscrewing the nuts/washers G for more thorough
cleaning. Refit the parts by placing the 2 P extensions of the side guides in the holes F on the bottom
of the oven; line up the 2 front eyelets of the guides with the screws fitted to the sides, then secure
the guides with nuts/washers G.
Do not wash the oven when it is still hot and do not use abrasive substances or products.
Ensure that the enamelled surface do not come into prolonged with acid and alkaline substances,
such as: VINEGAR, COFFEE, MILK, SALT WATER, LEMON JUICE, TOMATO JUICE, ETC.
The burners, caps, and flame diffusers should be cleaned periodically with soapy water. Before
replacing them in their housing they should be dried carefully and check that the holes in the flame
diffusers are clear.
Do not use steam cleaners to clean the appliance.
