62
ENG
User Manual: Safety Instructions
Before powering the appliance check that it is properly
adjusted for the type of gas available.
For any interventions or modifications, contact an authorized
Technical Assistance Center and request original spare parts.
For any interventions or modifications, contact your
Authorized Lofra Service Center and request original spare
parts.
If the power cord is damaged it must be replaced by the
supplier, by an after sales service or qualified personnel in
order to avoid dangers.
It is necessary to provide an omnipolar network isolator
in the power supply network, or one that allows complete
disconnection from the grid, having contacts suitable for the
overvoltage category III.
The switch must be easily accessible after installing the
appliance.
In the cookers that do not have a power cord, this manual
indicated the type of cable to use, teaking into account the
temperature of the rear surface of the device.
Before replacing the bulb, disconnect the unit from the
electricity supply and, if recently used, make sure that the
oven has cooled down.
Before carrying out any assistance operation, disconnect the
power supply and close the gas upstream of the appliance.
In the case of replacement of components and / or accessories,
use only original Lofra spare parts. Rely on qualified technical
personnel only.
1.3
ELECTRICAL SAfETY
