®
750 Control Panel Operation and Troubleshooting
14
463-3000-08 revised Sept 16, 2013
Quad Adjust
Allows the user to disable
Adjust Mode
of the Analog and Digital Gauge Pages. Button 3
disables while
Button 4
enables Quad Adjust. Disabling
Adjust Mode
locks the current gauge configuration and
prevents the operator from accidentally changing the gauge configuration.
Service
Sets the sixteen (16) service intervals in hours and resets the service timer. Setting the service interval to 0
disables the timer and the word
Off
is displayed
Pressing Button 4
allows adjusting the selected service timer.
Button 1
decreases the service interval time while Button 2
increases the service interval time in 10 hour
increments. Holding Button 3
for approximately 3 seconds resets
Next Service In
to the current service interval.
The service timer descriptions can be changed using the
CANplus Configurator.
Note
It is not possible to set the service timers if engine hours are not being received by the display.
System Menu
The
System Menu
allows the user to configure items affecting how the system functions. . Button 4
cycles
through the available values for the selected item.
Demo
The display supports several demo modes to operate with simulated data. Mode 1 simulates speed data and engine
parameters. Mode 2 only simulates engine parameters. Mode 3 simulates speed data, engine parameters and alarms.
Mode 0 disables Demo Mode. Demo is automatically set to 0 (Off) if live data is received.