Operation
WeftMaster CUT-iT
www.loepfe.com
17
ð
Display:
«Address: X #Slaves: X»
(Master/Slave address) when using just one unit: Address
(Master) = 0 and number of Slaves = 0
ð
or
ð
Display:
«Address: X #Slaves: X»
(Master/Slave addresses) when using Master and Slave: Address
(Master) = 0 and number of Slaves e.g. 2 depending on number of Slaves used)
ð
or
ð
Display:
«Address: X»
(Slave address) when using the control unit as Slave: Address (Slave) = e.g.
2
ð
Display:
«Wiretype»
ð
Display:
«Standby»
ð
Device ready for operation.
