Operation
18
www.loepfe.com
WeftMaster CUT-iT
4.3.2
Switching the device off
Cannot be used as emergency power off button.
n
Even though the WeftMaster CUT-iT device is switched off:
– The emergency relay (output relay) is active.
– The weaving machine is not stopped.
– Current remains present in the device.
ü
Device connected to power supply.
1.
Press for 3 seconds.
ð
Display:
«POWER OFF»
(switched off)
ð
Output current is switched off.
4.3.3
Putting the device into operation
ü
Device connected to power supply.
1.
Press.
ð
The following status messages are each displayed for 1 second during the Startup phase (see
Putting the device into operation [
16])
4.3.4
Current flow modes
Display (example)
n
1. Line
–
«P:4»
Program number is displayed.
–
«Standby»
Current flow mode is displayed.
n
2. Line
–
«Current: 2.2 A»
Output current is displayed.