Safety
10
www.loepfe.com
WeftMaster CUT-iT
2.3
Target group
The WeftMaster CUT-iT device may only be operated by authorized personnel. The authorized personnel
is qualified when it completes the necessary training, knows the requirements and is authorized for the
assigned task.
2.3.1
Authorized personnel
The WeftMaster CUT-iT manufacturer defines authorized personnel as follows:
n
«Operator»
and
«foreman»
– Qualified and trained to operate WeftMaster CUT-iT.
– Has read and understood the safety regulations.
n
«Industrial electrician / installation technician»
– Qualified and trained for all safety checks and installation, maintenance and service guidelines.
– Responsible for WeftMaster CUT-iT installation and maintenance.
– Has read and understood the safety regulations.
n
«Service technician»
– Loepfe employee qualified and trained for maintenance and repair of the device or persons
authorized with express permission from Loepfe Brothers Ltd.
2.4
General safety information
n
Follow all safety and operating instructions exactly.
n
Keep the complete documentation for later reference.
n
Observe all warnings on the device and in the documentation of the weaving machine on which this
device is installed or maintained.
n
The WeftMaster CUT-iT and the heat cutters may only be installed by an
«industrial electrician /
installation technician»
or
«service technician»
.
n
Check that all covers are closed and protective plates attached before starting the weaving machine.
n
Any use of the device beyond the intended purpose (see Intended Use [
9]) is considered to be
improper use. In this case, the protection provided by the device cannot be guaranteed.