Lode OEM, Service Manual

Page: 29 / 68

Service manual OEM treadmill V2.03 29
3.5 Replacement instruction main board 945701
Required tools:
•
Philips screw driver #2
Instruction
1. Remove the cover of the motor compartment as described in the instruction “removal
cover of the motor compartment.
2. Remove the grade motor as described in the replacement instructions of the grade
motor.
3. Remove the cables from the main board (figure 1,2,3,4,5,6,7&8)
4. To remove the cables from the power entree/circuit breaker it is easier to take the two
screws out.
5. Flip the two Faston connectors of by unlocking them with e.g. a small screwdriver
(fig.11)
6. Remove the screws that hold the mainboard and take out the mainboard.
Note: Make sure you use the shakeproof washers at the indicated locations when you place a
new mainboard into the treadmill.
fig.1 fig.2