Lode OEM, Service Manual

Page: 27 / 68

Service manual OEM treadmill V2.03 27
3.4 Replacement instruction grade motor 220017
Required tools:
•
Wrench 17 mm ( 2X)
Instruction
1. Remove the cover of the motor compartment as described in the instruction “removal
cover of the motor compartment.
2. Put the treadmill on its side (figure1)
3. Remove the M10 bolt, at the underside of the treadmill, by using two 17 mm wrenches
(figure 2&3)
4. Remove the M10 bolt, from the grade motor, in the motor compartment of the
treadmill. ( figure 4)
5. Cut the tire wrap that holds the cable of the grade motor (figure 5)
6. Unplug the cable from the mainboard (figure 6)
7. Slide the grade motor backwards (figure7).
8. Pull the motor out of the housing (figure 8)
9. Reassemble the treadmill in the opposite direction
10. Make sure you reconnect the grade motor to the mainboard(figure 6)
fig.1 fig.2