41
Care, Cleaning and Maintenance
6
6.2.2
Assembling
6.2.2.1
Preassembling of the Product Feedline
• Cut off 3.5 m of product feedline.
• Pull the product feedline
4
through the protection tubing
3
.
Take care that the ends of the product feedline are the same length.
• Slide the sleeve nut
2
and the sealing cone in the correct position over the protection tubing.
☞
• Carefully stretch the end of the product feedline
4
so that the cone can be mount more easily.
• Slide a cone of the proper size for the product
feedline and in the correct position over the
product feedline and to the stop into the
protection tubing.
30 mm
approx. 70 mm
< Ø
Ø
