13
INSTALLING THE LOCK (INTERIOR)
Step 5
continued
Align the square rod to the lock interior and attach
the Interior lock to the Interior mounting plate.
While you are doing so, gently push some
of the excess cable through the rectangular
hole into the door.
Place the remaining cable against
the interior side of the lock interior
so the lock interior sits securely
onto the mounting plate.
5
6
X
Y
Plug
X
cable that is coming through the door into the lock
interior
Y
. Match red side of the plug with red on socket -
insert tightly.
NOTE:
If you need to disconnect the cable,
make sure to press the snap tab to release the
plug before carefully pulling it out. Do not force,
as this may result in damaging the lock.
Make sure the cable is away and
not tangling with the square rod
C
