4
Preparation
1 " - 2"
(35mm - 50mm)
2 "
54mm
1"
25mm
Backset
2 " (60mm)
or 2
" (70mm)
IMPORTANT NOTICE
*
Measure and confirm your door is
between 1
" - 2" (35mm - 50mm).
Measure and confirm the hole in the
door is 2
" (54mm).
Measure and confirm that the backset
is between 2
" (60mm) to 2
" (70mm).
Measure and confirm that hole in the
door edge is 1” (25mm).
*
You are not required to drill an extra hole on your door. We have provided double
sided Adhesive tape for you to help stabilize the lock during installation. Only drill a hole
if you wish to have added stability. Please refer to the provided template for drilling if
needed.
Remove existing door hardware, latch or deadbolts before installing the new lock.
Use provided template to bore new holes if needed.
1
2
3
4
