Lockly DEADBOLT EDITION PGD1128, Installation Manual

Page: 13 / 28

NOTE: In case you need to reinstall the lock and disconnect the
cable, make sure to press the snap to release the plug before
carefully pulling it out. Do not force to pull the plug as this may result
to lose connection and damaged the lock.
6.1 From the cable coming from the external
assembly (PART B) , plug the small cable con-
nector x to y and screw tightly as shown:
STEP 6. INSTALLING THE INTERIOR ASSEMBLY (G)
6.2 Plug the larger cable that is coming
through the door into the Interior (PART G)
lock. Match the red side of the plug with the
red on the socket. Ensure it is inserted tightly.
Tuck the cable under the hook and route it
to the right as shown.
(x) (y)
Connect and Screw
Do not
touch the
pins inside
* Call our Customer
Service Hotline (669)
500-8835, if the pins are
not centered or bent.