Lockly DEADBOLT EDITION PGD1128, Installation Manual

Page: 20 / 28

10.2
：
Ensure the TF card that comes
with Vision Connect is properly inserted.
TF card is included
10.3
：
Ensure to plug the LAN cable to
the nearest Wi-Fi router to Lockly Vision
™
.
1ft cable (S) Included
10.4
：
Plug the USB adapter to
a wall socket.
STEP 10. VISION CONNECT HUB SETUP
10.5
：
After connecting to power, wait
for 2 minutes for Vision Connect to self
calibrate. Once the LEDs turned RED
and blinking yellow, Vision is ready to
connect.
IMPORTANT: Refer to Vision Connect Troubleshooting Guide if the LEDs do not meet the
described conditions.