SECTION 2.5
5
When the battery is in seriously low condition, Lockly Guard will make continuous
beeping sounds in addition to the flashing low battery icon on the touch screen. You
should replace batteries
immediately
to avoid your smart lock from
shutting down.
When your smart lock low-battery warning alert finally dies, you will have 3 chances
to unlock your smart lock either by a password, APP or fingerprint. If the unlock was
successful, the low-battery warning alert will be on for 1 minute. After which, the
smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and the
screen will display a low-battery icon.
Your Lockly will automatically detect battery
polarity. So hold your 9V battery lead in place
against bottom of the Lockly to
temporarily
activate the screen to enter your
Access
Code
. Be sure to hold the 9V battery against
the contact points located at the bottom of
the lock until you have successfully unlocked
your door with your
Access Code
.
Once unlocked, batteries should be replaced
immediately.
2.5 Low Battery
Dead
Battery
Condition
Indicator
Solution
Low
Battery
Replace batteries immediately
to avoid battery failure. Lockly
Guard can still operate up to 300
cycles in low battery condition.
When there is no
display and sounds;
and screen is non-
functional
.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, Use a 9V battery
as shown below to temporarily
activate the lock.
Battery Icon on the
display keypad will
light up to indicate
low battery
Touchscreen
9V
alkaline
battery