36
9, Clearing Remotes
CAUTION:
Clearing memory for remotes from the powerhead will clear ALL
programmed remotes, wireless wall mounted remotes and wireless keypads.
Your opener will no longer recognize any signal from any remote device,
including missing remote device.
ALL remaining( or recovered) remotes, wireless wall mounted remotes and
wireless keypads MUST be reprogrammed.
CLEARING MEMORY FOR REMOTES
Step1, Press and hold the
“P” button till all LEDs turn on and LED7 starts flashing
Step2, Press and hold the
“-” button till LED7 turns off and starts flashing again,
indicating clear remotes successfully.
Step3, Press and release
the “P” button to save.
To verify that the memory is cleared, press the remote key that was previously
programmed to the opener. If the memory has been cleared the opener will NOT run.
