24
6, Installation
(Continued)
NOTE: When installing the safety beam check the following:
-
Sensors are installed inside the garage, one on either side of the
door.
-
Sensors are facing each other with the lenses aligned and
receiving sensor lens does not receive direct sunlight.
-
Sensors are no more than 6 inches (15cm) above the floor and
the light beam is unobstructed.
PARTS INCLUDED
J
– motion sensors
K
– Sensor Bracket
H
– Hardware
The safety beam is attached to the door track, the sensors should be no more
than 6 inches (15cm) above the floor.
Step1, Install the security motion sensors
Install the sensor brackets(K) on each sides of door, attach security motion sensors(J)
with screws, make sure the lenses aligned and receiving sensor lens does not receive
direct sunlight.
