34
8, Programming
(Continued)
8-3-4, Programming with garage door opener
NOTE: THE WIRELESS KEYPAD INCLUDED WITH THIS OPENER HAVE
BEEN PRE-PROGRAMMED AT THE FACTORY, FACTORY SET PIN IS
“11
The following instructions are for wireless keypad purchased separately in addition to
those provided with this opener, but also can be used for wireless keypad that require
re-programming.
Step1, Press and hold the
“P” button, till LED7 starts flash
Step2, Press and release the
“+” button, all LEDs turn off except LED7
Step3, Quickly press and release the
“11” and back button, press and release the“11”
and back button, all LEDs turn on and LED7 starts flashing, indicating you have
successfully programmed your wireless keypad. Press and release
“P” button to save
The process of programming one keypad to one opener is complete.
