28
7, Adjustments
(Continued)
Step4, Press and release the
“P” button to save, LED 4 will begin flashing
The UP(Open) Travel limit is now programmed.
7-4, Setting the DOWN(Close) Travel Limit
Step1, LED4 is flashing now, press and hold the
“-” to begin closing the garage door.
When the garage door is fully closed, release the
“-”. If you have gone far press and
release the
“+” to move the door up slightly. You may jog “+” or “-” buttons. The door
should rest tightly on the floor.
Step 2, Press and release the
“+” button to save. Meanwhile, the garage door opener will
operate one time for testing. And LED3 turns on
The DOWN(Closed) Travel limit is now programmed.
7-5, Adjust the Operating Force
NOTE: Force limit is factory set and rarely require adjustments. Making
adjustments to setting please follow below steps
7-5-1, Adjusting the Force of UP(Open)
Step1, Press and release the
“P” button, LED2 will begin flashing