64
Adjust set point temperature(s)
During normal operation, set point temperatures can be
adjusted from the Home Screen by pressing the DETAILS
button on the bottom of the screen (see FIG. 11-3).
1. To change a set point, use the set point slider feature
or the PLUS (+) and MINUS (-) buttons
to adjust the set points as shown in FIG. 11-3.
2. Once the set point has been adjusted to the desired
setting,
press the Door Menu slider (top left) or the
Setup button.
3. Press the APPLY CHANGES button on the top of the
screen.
NOTE:
The APPLY CHANGES button must be pressed to
complete programming of the controls. Failure to press the
APPLY CHANGES button will result in an unprogrammed
control. The Door Menu button will become highlighted
when there are changes that can be applied.
11
Start-up
Installation & Operation Manual
Figure 11-3
User Set Point Screen
