4
LCN-GT10D
Installation guide
building controls in perfection
®
Installation
The LCN-GT10D must not “tilt” on the wall, as this will lead to false triggering.
That is why the edge of the flush mounted box or
cavity wall box must be countersunk when
installing, to guarantee a stable fixing and a
flawless function of the LCN-GT10D.
The LCN-GT10D must not “tilt” on
the wall, as this will lead to false triggering. That
is why the edge of the flush mounted box or cavity wall box must be countersunk when
installing to guarantee a stable fixing and a flawless function of the LCN-GT10D. When
Installing on Kaiser cavity wall flush mounted boxes, the seperating strip must be removed
from the middle of the box, as this protrudes around 0,5mm.
Pull out the plastic slider a few millimetres on the LCN-GT10D when fixing to the supplied
mounting frame. When the slider is pressed back in, The LCN-GT10D is locked firmly to the
mounting frame.
Note:
Important:
Important:
When the temperature sensor is being used, the LCN-GT4D should not be installed
near heating sources, lights, cooling devices or a loaded (warm) LCN-UPP´s, because
these factors falsify the temperature value. In this case it is better to install an additional
LCN-GRT!
C
D
