LCN-GT10D
Installation guide
building controls in perfection
2
®
Scope of delivery
LCN-GT10D, LCN-NUI (power supply), mounting frame, 4 screws 3,2 x 15mm, inlay for
inscription, pen, CD &1 sheet of paper (blank).
How it functions
The
sensor keys
on the LCN-GT10D react to touches on the glass surface. Depending
on the duration of contact, an appropriate LCN-control command (Short, L
ONG
or
R
ELEASE
) will be sent. When no configurations are made to the keys, the keys are
assigned as follows: X1 - X4 work on the keys in the A table according to their numbers.
The bottom 6 sensor keys work on the D table of the module. Further information can be
found in the online help on the LCN-PRO. A signal sound (can be swithed off) informs
over key contact. There is the possibility to trigger off further keys, by touching two keys
at the same time. Keys D1+D6 trigger off D7 and D2+D5 the key D8. This type of
double touching is especially suitable for functions that may not be triggered accidental-
ly (central off, switching the alarm system, etc).
The 6
status-LED´s
in the bottom sensor keys can be programmed individually (O
N
,
O
FF
, B
LINKS
, F
LICKERS
).
