LNS SERVO S3 T, Instruction Manual

Page: 27 / 120

CHAPTER 3: SYSTEM START UP 25
QUICK LOAD SERVO S3T
Transverse assembly of the system:
1.
Move the rails to their respective sides.
2. Bring the bearings (D) opposite the recesses (E) .
3. Push the rails (C) underneath the unit.
4.
Move the bearings apart and place them opposite the mounting holes.
5.
Insert the retaining screws (F) and screw them into the bearings (D) , without tightening them.
6.
Fit the cross members (G) onto the rails (C) .
7.
On each mounting bracket, unscrew the screws (H) and (I) (16 in total)
8.
Install the four levelling screws (J) at the ends of the rails.