LNS ECO LOAD, Instruction Manual

Page: 41 / 67

37
ECO LOAD
7. OPERATING PROCEDURE
7.1 Control panel
Once the connections between the lathe and the feeder have been completed, functions F1 to
F8 have to be set so that the feeder can work in optimum conditions.
7.2 Operation of the control panel TD 200
1. To access functions F1 to F4, directly press the buttons.
To access functions F5 to F8, you have firstly to press the button :
+ = F5
+ = F6
+ = F7
+ = F8
2. The display shows two items of information at two levels.
The
and buttons are used for selecting one or other of these items.
3. To confirm, press the button.
For example :
F1 - F4 F5 - F8
Press F3 button : Workpiece length
Select
Adjust workpiece length or or