10
START UP MANUAL
HYDROBAR EXPRESS 326 S2
3.2
Mechanical settings :
•
Setting of the bar magazine point 3.2.1
•
Replacement of the guiding elements point 3.2.2
•
Replacement of the feeding pusher point 3.2.3
•
Replacement of the collet point 3.2.4
•
Replacement of the clamping jaws of the front rest (shaped bars) point 3.2.5
3.2.1
Setting
The setting of the loading diameter is performed simultaneously for all supports by a single
setscrew.
On the other hand, the upper limiters must be adjusted on every support.
The inclination of the surface stays the same, independently of the diameter, the profile, or
the material of the bars to be loaded.
Procedure :
1. Loosen the locking handles (F) and raise the upper limiters (A)
Summary of Contents for 326 S2
Page 1: ...ENG...