Maintenance
13 Maintenance
Before cleaning or maintenance work
switch off the machine with the OFF
key (3) and remove the main plug
l
from its socket.
Disposal
When choosing lubricating oil and bag materials keep
in mind compatibility with the environment, risks to
health, regulations on disposal and the facilities for
proper disposal locally.
l
Observe manufacturer’s instructions!
l
Dispose of used oil according to regulations!
13.1 Cleaning
13.1 Cleaning agents
Use commercial, neutral non-abrasive cleaners, which
meet hygiene requirements, for
vacuum chamber
sealing bars and sealing pad
filling plates
vacuum lid
lid gasket
Use commercial stainless steel cleaners for outer
surfaces of machine
13.1.2 Cleaning Interval
Daily
l
Remove clean filling plates (20) and chamber insert
(24)
l
Clean vacuum chamber no foreign bodies or
liquids should get into the pipe system
l
Remove sealing residues from sealing bar (42) and
sealing pad (38). Do not use any sharp-edged tools
l
Clean lid gasket
l
Clean outside surfaces of machine
l
Keep the working space around the machine clear
and tidy
42
20
38
L
24
I
J
13.2 Servicing
The
Customer Service is available on request
for all servicing work.
13.2.1 Sealing Bars
The teflon tape on the sealing bars (42) develops burn
patches in the course of time and must be replaced.
Taking Down
Pull the sealing bar (42) downwards from its holder.
Fig. 25
Operating Instructions Vacuum Packaging Machine Type
33