Site Requirements Transport and installation
,
6 Site Requirements
Operating Space
The operating site must be dry and well ventilated.
The machine must be protected against constant
exposure to spray, water jets or washing-down water.
Foundation
A level industrial floor is satisfactory. The vacuum pump
causes slight vibration which may be transmitted by the
floor.
Ambient Temperature
The machine works at a room temperature of
If run below
the current taken by the vacuum
pump rises, and the fuses may burn out.
Space for Operation and Maintenance
There should be enough clear space left around the
machine.
Side ventilation openings should be free.
Hanging cupboards over the machine should be high
enough to allow clearance of at least 10 cm when the
machine lid is fully raised.
6.1 Services Connections in Building
Power Supply
See Heading 4, Technical Data
l
The connecting values (voltage etc.) for your
machine can be found on the type plate on the back
of the machine.
Compressed Air Connection
The compressed air connection is on the left at the back
of the machine.
Pressure needed on site: 5-8 bar, 0.6
7 Transport and Installation
The machine is completely assembled and is in one
unit.
The delivery comprises
Equipment as ordered
Operating Instructions for machine
l
Remove wrapping.
l
Check that there has been no loss or damage in
transit.
l
In the event of damage in transit keep packaging and
notify
and the carrier at once.
7.1 Instruction for Transport
ATTENTION
Keep machine upright during transport. Do not tilt
or the vacuum pump will be damaged!
l
If the machine has inadvertently been tilted or
dropped in transit notify the
Customer
Service.
7.2 Installation
l
Roll the machine to its intended position, and adjust
till horizontal.
l
Lock front guide rollers.
14
Operating Instructions Vacuum Packaging Machine
Type