Page 12 - Copyright Llaza, S.A. - May 2011
Assembly instructions
4. LEVELLING THE ARMS
N
O
M
5. INSTALLATION OF THE WEATHER COVER
R
P
Position the weather cover profile
(P)
and attach it
to the brackets using the bolts supplied
(B)
.
Remember to attach the rubber strip
(R)
to the front
of this profile, which cushions the closing of the cas-
sette.
B
MONOBOX-400
Remove the pin or shaft
(O)
that attaches the
arm fork, and note that this model has two
tightening studs:
an internal one
(M)
, which is used to level the
height of the arm joint, and an external one
(N)
, which secures the pin within the bracket
and acts as a limit for the first one.
