Page 18 - Copyright Llaza, S.A. - May 2011
Installation of the awning
10. INSTALLATION OF THE COVER KIT FOR THE FABRIC GAP
7
5
C
Once both brackets and the tube with
the fabric are installed, use the attach-
ment plates
(C)
, which were inserted for
this purpose at the beginning of the pro-
file assembly, to attach the L-shaped
brackets
(6)
. These will allow a guide
roller to be attached, which raises the
fabric and brings it close to the fabric of
both awnings.
6
Place the spring inside of the rolling tube, paying
special attention to the side in which it is placed
so that it functions correctly.
Place the axle-fabric assembly into the brackets
(5)
attached to the square bar.
As a final step, the fabric with its hem rod is insert-
ed into the slot
(7)
for this purpose in the front pro-
file
.
The recommended measurement for the fabric to
cover the gap between the two awnings is 600 milli-
metres in width, and it must be manufactured with-
out side seams.
MONOBOX-400
