- 6 -
7. All the parts of body & every cases
*from the unpacking to setting up
(1) LOAD CHAIN
*Check out if the load chain in the pack is
tied to wire ; which is to avoid mixed-up.
Remove every pieces of wire, vinyl, tags
and so on from the chain so that the hoist
body can be free from the dust.
* Do not use a load chain before remove
every twist or knot
(See the picture1)
* Remove all the dust before setting up or
operating the hoist
* When you operate more than double load
chain,
the
low
class
chain
can
possibly slip out between the chains to make
a twist. Do not operate it with the twist
still on. It is dangerous.
Let the low class hook to be get out in
opposite way. (see the picture no.3)
(2) Chain back install
* It is necessary to install a chain bag. If
you don't install a chain bag, unloaded
part would be stuck.
* After the unloaded part comes out about
50m, install the chain bag, It is a lot
easier also the load chain can fit in the
chain back appropriately.
Summary of Contents for LD Series
