Rico RS Edition 1
page 13
12.5
Push handle
Simultaneously push the regulating buttons (1) on both sides of the stroller, and then set the push handle on the desired
height. After setting the desired position of the push handle, move the push handle up and down in order to hear a characteristic
click of the blockade Fig. 11
Fig. 11
NOTE!
It is worth remembering that any additional object hanging on the push handle
poses a significant influence on the stability of the stroller.
12.6
Adjusting the angle of the seat
Press handle number 2 to start angle seat adjustment. The handle is placed on the horizontal bar attached to the seat
backrest. Holding the handle (2) adjust the angle of the seat. Adjusting the angle, REMEMBER to hold the handle and the crossbar
instantly. When the angle is in good position release the handle. Finally, grab the horizontal crossbar (3) and move up and down
to confirm that seat is blocked and safe to use. Never use seat when the angle seat adjustment is loose.
Fig. 12
1
1
1
2
3
