Rico RS Edition 1
page 11
12
Frame of the Rico RS stroller
NOTE!
After each adjusting procedure it is crucial to make sure that all regulated elements
are properly mounted and secured.
12.1
Mounting and removing rear wheels
Rear wheels are mounted by putting the wheel hub onto the axis, until the pin of the mechanism blocking the wheel on the
axis is blocked. When the pin blocks, you can hear a
“
click
” signal
.
In order to remove the rear wheels, press the pin of the blockade, and then slide the wheel off the axis.
Fig. 7
NOTE!
Before mounting the wheel, please remove any dirt both from the axis and from
the wheel.
NOTE!
After mounting the wheel, make sure that the wheels are properly secured.
12.2
Unfolding the frame
In order to unfold the frame place the stroller on the ground, pull the blockade (1) back, and then pull the handle (2) upwards,
until you hear a characteristic click of the blockade.
Fig. 8
NOTE!
When unfolding the frame it is crucial to be particularly aware of the risk and pay
particular attention to the fact that hands may be trapped by the moving components.
2
1
