Rico RS Edition 1
page 19
In order to adjust the depth loosen the knobs (3) blocking the hip support as well as the knobs (4) blocking the setting of the
depth of the footrest. In case of setting the asymmetry of the seat platform it is also necessary to loosen the knobs (5) blocking the
guiding rails of the footrest in relation to the seat platform along with the knob (6) blocking the position of the wedge. After
loosening appropriate knobs, adjust the depth of the seat by pulling or pushing the platforms to the desired depth. After adjusting
the depth, retighten all knobs (6), (5), (4) and hence block the position of the footrest, and then retighten the knobs (3) setting the
hip support in the desired position.
Fig. 21
13.7
Adjusting the angle of the footrest
The angle of inclination of the footrest under the seat is adjustable in relation to the seat. To adjust the angle, press the
buttons on the adjuster (1) and adjust the footrest to the desired position. To secure the position of the footrest, release the
buttons and slide the footrest until the locks click into place adjuster
Fig. 22
1
2
6
4
3
5
1
1
