manualshive.com logo in svg

LIW BAFFIN Automatic, Manual, Page: 4 / 23

Share
Download
LIW BAFFIN Automatic Manual Download Page 4

4 

 

 

1.

 

General information 

 

1.1

 

Introduction  

 

The  BAFFIN  Automatic  Multifunctional  device  developed  by  LIW Care  Technology  sp.  z  o.o.  was designed  and  patented  to  provide  new 
quality in rehabilitation. We have made every effort to ensure that BAFFIN Automatic Multifunctional device was as easy to use as possible 
while  providing  vast  anatomical  adjustment  possibility  and  the  best  posture  correction.  Before  using  the  Multifunctional  device,  please 
familiarise yourself with this manual. By following all recommendations included in this manual, you will be able to avoid any situations 
that might damage the equipment and ensure your safety and comfort while using the device. You will be able to take full advantage of all 

the benefits of the device only when it is properly fitted to the patient's body and their personal needs.  

1.2

 

General safety conditions  

 

The biggest concern of LIW Care Technology Sp. z o.o. is to ensure the safety of our patients using the device. In order to guarantee full 

safety of the user of our stander, you have to follow these recommendations:  

1.

 

 Prior to any attempt to use the device, thoroughly familiarise yourself with this manual. If in doubt, contact the seller or 
manufacturer.  

2.

 

 Make sure that all the information, recommendations and warnings contained in these chapters are fully 
comprehensible. This manual includes paragraphs marked WARNING, which is meant to call special attention to its 
contents. It means the following:  

 

NOTE! 
This symbol is used to call the reader's attention to the text below. 

FAILURE 

TO  FOLLOW  THE  CONTENTS  OF  THIS  PARAGRAPH  MAY  BE  HAZARDOUS  TO  THE  USER'S 

HEALTH  AND LIFE, AS WELL AS TO THE SAFETY OF THE DEVICE.  

2.

 

Construction of the Multifunctional device  

 

The Baffin Automatic Multifunctional device consist of 

1

 

1 – Central Core (Spine)

 

2 – Back Support

 

3 – Side Support

 

4 – Hip Support

 

5 - Armrest

 

6 – Knee Support

 

7 – Footrest 

 

8 – Foot Platform 

 

9 – Standing Base

 

10 – Seat 

 

11 - Actuators 

12 – Headrest

 

 

                                                           

1

 

The equipment of Baffin Automatic 

Multifunctional device 

is available depending on the Continent, Country. 

  

 

 

Summary of Contents for BAFFIN Automatic
























Reviews:

No comments