16
Fig. 15.2. Adjustment of the size S headrest Fig. 15.3. Adjustment of the size M, L headrest
6.2
Table
NOTE:
Before mounting the table on the device, adjust the table handles to the armrests. Improper width of
the handles may make the table unstable, damage the device or injure the user.
6.2.1
Adjusting the spacing of table handles
In order to adjust the table handles to the sockets located underneath the armrests, loosen the
screw’s nuts
(fig. 16) on the
handles above the table top. Then slide the handles out or in to fit the socket spacing and tighten the screws.
Fig. 16
Adjusting the spacing of table handles
6.2.2
Installing the table
To mount the table on the stander, loosen the locking knobs and push the handles of the table in the sockets located
underneath the armrests. After sliding the table in to the right depth, tighten the locking knobs (Fig. 17).