![Livox Horizon Quick Start Manual Download Page 10](http://html.mh-extra.com/html/livox/horizon/horizon_quick-start-manual_1931744010.webp)
Livox Horizon
Quick Start Guide
9
①
The beam divergence of the Livox Horizon is 0.28° (vertical) × 0.03° (horizontal). The divergence of the
embedded laser, however, is approximately 25.2° (vertical) × 8° (horizontal), which was measured at full width
at half maximum. The maximum power of the embedded laser may exceed 70 W. In order to avoid being
injured by the laser, DO NOT disassemble the Livox Horizon.
②
Livox Horizon cannot precisely detect objects which are less than 0.5 m away. In this situation, the serial
number of the Livox Horizon displayed on Livox Viewer will change color to warn users. If in use at the time,
the SDK can be checked for more information about the warning.
③
Tested in an environment at a temperature of 25° C (77° F) with a target object that has a reflectivity of
80% and is 20 meters away from the Livox Horizon. The actual environment may differ from the testing
environment. The figure listed is for reference only. The point cloud may distort to a varying extent when
the target object is within the range of 0.5 to 3 m. Contact Livox for support if you require to detect objects
within this range.
④
The false alarm ratio of the noise created by the stray light in a test environment of 100 klx at a temperature
of 25° C (77° F).
⑤
The Livox Horizon has an overall IP rating of IP67 (not including Livox Converter 2.0 and cables).
⑥
In low-temperature environments, the Livox Horizon will first enter self-heating mode, and its power may
reach a maximum amount of 42 W. Make sure the power supply is suitable based on the peak power value
of the Livox Horizon. Refer to the Livox Horizon User Manual for more information.
⑦
Make sure the output voltage of the power supply is within this range at all times.
Power Supply Voltage Range
⑦
Livox Horizon: 10 ~ 15 V DC (recommended 12 V DC and 30 W or
higher)
Livox Converter 2.0: 9 ~ 30 V DC
Noise
40 cm omnidirectional<50 dB (without fan)
Dimensions
77×115×84 mm (with self-dissipation module)
77×115×67 mm (without self-dissipation module)
Weight
Approx. 1180 g (with self-dissipation module)
Approx. 1010 g (without self-dissipation module)