background image

AFTER SALES SUPPORT

    0800 824 556    [email protected]

08

Instructions

Filling the Water Tank (for steam ironing)

1.   Ensure the Steam Iron is unplugged from the power outlet.
2.   Set the temperature control dial to the OFF position.
3.   Lift the top of the water inlet cover to open it.
4.   Hold the Steam Iron with the water inlet cover in a vertical position.
5.   Fill the water inlet slowly, to allow the air in the tank to escape otherwise the water may  
 overflow.
6.   Do not fill past the ‘max’ level or water may spill whilst in use.

Temperature Control

Put the Steam Iron upright and select the desired temperature with the temperature 
control dial. Please see table below for suggested settings. Always make sure you pay close 
attention to the instructions and care symbols on the textile care label. 

Label Marking

Temperature Setting

Heat Setting

Synthetics, Nylon, Acrylics, Polyester 

Cool Heat Setting

Silk, Wool 

Warm Heat Setting

Cotton, Linen

Hot Heat Setting

When ironing always start with the fabrics that require the lowest temperature setting. 
Then progress to materials that require the medium temperature setting. Always iron the 
materials that require the highest temperature setting last.

NOTE: 

 The indicator light will illuminate whilst the Steam Iron is heating up. Once it 

has reached the selected heat setting, the indicator light will go out and you can begin 
ironing. 

Steam Control

The steam control adjusts the amount of steam the iron emits when in use. 
1.   Ensure you have filled the water tank.
2.   Set the temperature control dial to the desired temperature.
3.  Select the desired level of steam using the steam control dial as shown in Fig. 1 (see    
 

page 06).

4.  Commence ironing. The steam will only be emitted whilst ironing and the amount is  

 

 

determined by which steam control setting you have selected.

Cool Mist Spray 

The cool mist spray works as long as there is water in the water tank.
1.   Ensure you have filled the water tank. 
2.   Lift the Steam Iron off the fabric. 
3.   Aim the cool mist spray at the fabric. 
4.   Press the cool mist spray button. 
 

(Synthetics)

(Silk/wool)

(Cotton/linen)

Summary of Contents for IA1476














Reviews: