AFTER SALES SUPPORT
0800 824 556 [email protected]
10
Cleaning, Care and Maintenance
Ensure the Steam Iron is switched off and unplugged from the power outlet. Allow for the
Steam Iron to cool down completely before cleaning.
1. Place the Steam Iron in an upright position, once the Steam Iron has completely cooled
down, empty the water tank.
2. Wipe the outer surface with a soft damp cloth and dry thoroughly.
3. Remove the spots of burnt fabric from the non-stick soleplate. To do this, set the Steam
Iron to the hot heat setting (
) and iron over a damp piece of cotton or linen cloth.
Ensure you handle with care and do not scratch the non-stick soleplate.
Self-Cleaning
It is recommended you use the self-cleaning function monthly to clean the non-stick
soleplate.
1. Fill the Steam Iron with water to the ‘max’ level.
2. Plug the Steam Iron into a power outlet and switch the power outlet ON.
3. Adjust the temperature control dial to the hot heat setting (
). The indicator light will
illuminate whilst the Steam Iron is heating up. Once it has reached the selected heat
setting, the indicator light will go out and you can begin using the Steam Iron.
4. With the soleplate facing downwards, press and hold the self cleaning function for 1
minute whilst gently moving the Steam Iron back and forth over a basin.
5. Water and steam will wash away any residue through the non-stick soleplate and into
the basin.
6. Turn the temperature control dial to the “min” position, and move the steam adjustment
knob to no steam.
7. Unplug the Steam Iron and allow for it to cool down completely.
8. Empty the remaining water from the tank into the basin.
9. Once it has cooled down, wipe off any excess moisture and store the Steam Iron on its
heel.
CAUTION:
Do not immerse the Steam Iron in water or any other liquids.
CAUTION:
Do not use harsh or abrasive cleaners, solvents or metal scourers on the
non-stick soleplate, they will damage the plate.
