AFTER SALES SUPPORT
0800 824 556 [email protected]
07
Getting Started
Before First Use
Remove all the parts from the packaging materials and thoroughly read the user manual
before using this appliance for the first time. Ensure all parts indicated on the Product
Overview Diagram have been included in the giftbox.
1. Remove the protection film from the non-stick soleplate before first use.
2. You can use your Steam Iron with normal tap water. If water has a high mineral content
or is hard water, then destilled or demineralised water has to be used to increase the
Steam Iron’s life span.
3. To clean the water tank, fill it with clean water and then empty it out. This will clean out
any residue left within the water tank during the manufacturing process. Then refill the
water tank with clean water once again.
4. Press the burst of steam spray button 3-4 times to flush the water through the steam
spray pump.
5. Press the mist spray button 3-4 times to flush the water through the cool mist spray
pump.
6. With a dampened piece of cloth, wipe over the non-stick soleplate to ensure it is clean.
NOTE:
You may notice a slight odour being emitted from the Steam Iron during the
initial use. This is normal and will cease with continued use.
WARNING:
Only proceed with the above steps before the Steam Iron is turned on. The
Steam Iron must not be on or hot.
