21
7.9
Setting Individual Zone Timer Programs
1. Press
or
to select the required zone.
2. Press
to display the current program days for that zone.
3. A CAPITAL letter indicates that the on/off times will apply to that zone on that day. Use
to activate, or
to deactivate each day, then press
SET
to move to the next day.
Repeat for each day.
4. Press
SET
after the final day value to enter the Start time screen. (Note: If no days have
been selected the configuration routine will exit at this point)
5. Use
or
to alter the start time to the correct value (in 10 minute intervals) then
press
SET
to proceed to the Stop time screen. PM is indicated by a “
p
” after the time.
6. Repeat for the Stop time then press
SET
to complete setting the program for that zone
and return to normal operation.
7. Repeat for each zone as required.
Summary of Contents for C-CCT-1210
Page 27: ...To Indoor Unit...
