19
7.4
Activating / Deactivating a Zone
1. Press
or
to select the zone to be activated / deactivated. The current status of
the selected zone is displayed on the second line of the LCD read-out.
2. Press
to turn the selected zone ON or OFF as required. The green LED below the
button indicates the zones on/off status.
Alternatively, all zones can be activated / deactivated simultaneously by the selecting the
global screen then pressing
.
7.5
Setting a Zone Temperature
1. Press
or
to select the target zone.
2. Press
SET
.
3. Use
or
to adjust the set point to the desired level.
4. Press
SET
to save and exit.
7.6
Naming Zones
Zone names must be eight characters in length. A blank character must be used to fill spaces
where no letters are required.
Tips:
• To accept one of the preset zone names, press
SET
repeatedly to accept each character
including any blanks until the controller reverts to the standard display.
• When adding a custom name it is often quicker to edit one of the preset names with the
same number of letters.
1. Press
or
to select the zone to be named.
2. Press and hold
SET
for approximately ten seconds, until the display reads
Z1 Name:
.
3. Use
or
to view all of the preset zone names.
4. Press
SET
on your choice (e.g.
Loun
g
e
,
Games
or
Custom
).
5. Use
or
to change the first character of the zone name if required.
6. Press and hold
or
to scroll quickly through the available characters.
7. Press
SET
to move to the next character. Press
MODE
to return to the previous character to
correct a mistake.
8. Repeat for all eight character spaces.
9. Pressing
SET
to accept the final character will save the zone name and the controller will
return to the standard display.
Summary of Contents for C-CCT-1210
Page 27: ...To Indoor Unit...
