Your heater comes with a remote control that can change all settings.
Remote Control:
ON/OFF BUTTON
Press to turn the bladeless heater ON and OFF.
FIGURE 3
MODE BUTTON
Press to cycle through the three available modes: fan, low heat and high
heat.
FIGURE 3
TEMP. BUTTON
Press repeatedly to increase (+) or decrease (-) the desired room
temperature. After pressing the temp button the desired temperature
will flash for 3 seconds, before the unit reverts to showing the room
temperature. When the desired temperature has been reached the unit
will change into fan mode.
FIGURE 3
TIMER BUTTON
Press repeatedly to increase the running time in 1 hour intervals. The
timer can be set between 1 hour and 12 hours. The display will show the
duration currently set. When the display is showing the timer duration the
“h” symbol will illuminate next to the timer. To cancel the timer repeatedly
press the timer button until 0 is shown.
FIGURE 3
ROTATE BUTTON
Press to turn the rotate function on and off. When the rotate function is
on the horizontal direction of the airflow is slowly moved from side to
side and the swing indicator 0 will be illuminated.
FIGURE 3
Figure 3
ON/OFF
MODE
TEMP +
Using Your Heater
Remote Control Operation
7
TIMER
ROTATE
TEMP -
