Control Panel and Settings:
TEMP. BUTTON
Press repeatedly to increase the desired room
temperature. After pressing the temp button the
desired temperature will flash for 3 seconds,
before the unit reverts to showing the room
temperature. When the desired temperature has
been reached the unit will change into fan mode.
FIGURE 2
TIMER BUTTON
Press repeatedly to increase the run time in 1 hour
intervals. The timer can be set between 1 hour and
12 hours. The display will show the duration
currently set. When the display is showing the
timer duration the “h” symbol will illuminate next
to the timer. To cancel the timer repeatedly press
the timer button until 00 is shown.
FIGURE 2
ROTATE BUTTON
Press to turn the rotate function on and off. When
the rotate function is on the horizontal direction of
the airflow is slowly moved from side to side and
the rotate indicator 0 will be illuminated.
FIGURE 2
MODE BUTTON
Press to cycle through the three available modes:
fan, low heat and high heat.
FIGURE 2
ON/OFF BUTTON
Press to turn the bladeless heater ON and OFF
during normal use.
FIGURE 2
9
Figure 2
Timer
Fan
Low
High
Temp.
Rotate
On/Off
Mode
Using Your Heater
Initial Setup
6
