Figure 4
Heater
Grille
Pre-Filter
WARNING:
Shut off the unit and unlpug it before cleaning or
performing any maintenance.
Cleaning the Surface:
1. Clean the heater with a duster or a soft damp cloth.
2. Do not use chemical solvents (such as benzene, alcohol or gasoline)
as they may cause irreversible damage.
3. Make sure no water enters the control panel or gaps in the casing.
4. Do not run the unit until completely dry.
5. Place the heater in its original box or cover to protect it from dust
when not in use.
6. Store it in a cool dry place.
11
Maintenance
Cleaning and Storage
8
Cleaning the Auto Duster™ Pre-Filter:
1. Turn off and unplug heater from power source.
2. Push up on prongs to release back grille.
FIGURE 4
3. Remove filter from grille.
4. Vacuum filter with vacuum’s brush attachment. Hold down pre-filter to
prevent being sucked into vacuum. DO NOT use water any liquid or
detergent to clean the pre-filter.
5. If needed, clean grille with a soft, damp cloth.
6. Align filter in grille and ensure filter is laying flat.
7. Insert top tabs of grille into heater.
8. Push grille towards fan until the bottom prongs securely snap into place
.
