Turning on/off and finding your location
How to make changes to emergency contacts
You can make changes to the emergency contacts and other settings by sending simple commands
to the mobile number of the pendant via text. To change any emergency contact number, send these
commands to it from a mobile phone:
Do not include spaces in any text command. Is not case sensitive. The pendant will respond to
each text command with a reply text to confirm the change. To check the list of contacts, send
this text command to the pendant:
A?
We recommend you test your device when
you receive it to ensure it operates correctly.
You can test it by pressing the SOS/Heart
button. Make sure your contacts know in
advance you are testing your device.
We have programmed your Home
Charging Station with the home address you
supplied us with. If you have an issue with the
location shown in a text message, call Support
on 1800 936 774.
Testing your device
Your home location
Quick Start Guide
2
The Home Charging Station has been programmed with the GPS location of your home address
you supplied us with. Please leave the station at your home and plugged in at all times.
TIP
To turn the device on, press the grey, upper side button till it vibrates. The LEDS will flash.
Alternatively you can turn it on automatically by placing it in the charging station or by connecting
the magnetic USB cable to the back.
To turn the device off, click or press the SOS/Heart button and the upper grey side button together till
the device vibrates and side LEDS go off. Or send the text command 'OFF' to the device from a mobile
phone.
The device uses Bluetooth to find its location inside the home. Outside the home it uses Wi-Fi or GPS
to find its location.
Person
1
A1,
1,1,0400123456
Send
Person
2
A2,
1,1,0400123456
Send
Person
3
A3,
1,1,0400123456
Send
Person
4
A4,
1,1,0400123456
Send
Person
5
A5,
1,1,0400123456
Send
Person
6
A6,
1,1,0400123456
Send
