LIVARNO LUX 3571-096L, Assembly, Operating And Safety Instructions

Page: 36 / 44

37 GB
Introduction Introduction
Intended use
This light is only suitable for indoor use
in dry and enclosed spaces. The light can
be fastened to any normally inflammable
surface. This product is only intended for private
household use.
This product is an illuminated deco-
ration. Do not use this light as room
lighting or as a night light.
This is a specialist product, as the chromaticity
values lie outside the ranges stated in brackets.
Chromaticity coordinate: (x < 0.270 or
x > 0.530); (y < -2.172 x² or y > -2.3172 x²
+ 2.3653 x -0.1595).
The coloured LEDs are not designed for use in
other applications.
The permanently fitted illuminant (except for G4
light bulbs) is not replaceable; if the illuminant
reaches the end of its life, replace the entire light.
The permanently fitted LED light bulbs
are not suitable for dimmer or elec-
tronic switches.
Scope of delivery
Check immediately after unpacking that the parts
are complete and that the product is in proper
condition.
1 Colour-change ceiling light, model 3571-096L
9 Halogen light bulbs, G4, 14 W
1 Remote control
1 Battery, Type CR2032
4 Screws (ceiling bracket)
4 Wall plugs (ceiling bracket)
1 Tool
9 Lamp shades
1 Set of assembly instructions and instructions for use
Parts description
1
Mounting bracket
2
Connection housing
3
Rawlplug
4
Screws (connection housing)
5
Screws (mounting bracket)
6
Lamp shades
7
Plastic ring
8
Nut
9
Tool
10
Light bulb, G4
11
Bulb socket
12
Plastic housing
13
Protective tube
14
Mains connection cable (external)
15
Terminal block
16
Remote control unit
Technical Data
Ceiling light:
Operating voltage: 230–240 V∼, 50 Hz
Halogen light bulb: 12 V∼, 14 W, G4
LED light bulb: LED 54 x 0.06 W,
coloured
Rated power
maximum:
9 x max. 14 W
Protection class: II /
Protection class: IP20
Remote control receiver:
Rated voltage: 220–240 V∼, 50 / 60 Hz
Max. load capacity 250 W
Frequency: 433.92 MHz
Remote control transmitter:
Operating voltage: 3 V , 5 mA
Frequency: 433.92 MHz
Remote control battery: 3 V , Type CR 2032