8 GB/IE/NI
Start-up / Maintenance and Cleaning / Disposal / Information
Safety / Preparation / Start-up
Do not leave the light or packaging material ly-
ing unattended. Plastic film or bags, plastic parts
etc. can turn into dangerous toys for children.
Do not cover the lamp or the mains plug with
objects. Excessive heat can result in a fire.
Never leave the lamp unattended whilst in use.
Safe working
Mount the light so that it is protected from mois-
ture and dirt.
Carefully prepare for assembly and allow your-
self adequate time. Organise all parts and any
necessary additional tools or materials before
starting so they are easy to reach.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never assemble the lamp if you are unfocused
or feel unwell.
Preparation
Required tools and material
The tools and materials specified are not included.
This information and these values are non-binding
and are only provided as a reference. The nature
of the material is determined by the individual local
conditions.
– Screwdriver
Start-up
Mounting the light
Note:
When assembling the stand tube
4
be sure
not to damage the mains lead inside the lamp.
14118405L / 14118406L
Unfold the floor lamp.
Insert the connector (metal)
8
into the bottom
part of the tube
4 b
and screw in place.
Carefully pull the mains cable
11
out of the
tube
4
.
Screw the tube
4
onto the base
5
.
Note:
Be sure to tightly secure the tube
4
to
ensure it is stable.
Position the floor lamp upright.
Adjust the lamp arm
3
to the desired position.
Adjust the lamp head
1
to the desired position.
Push any cable protruding from the joints as far
into the tube
4
or lamp arm
3
as possible.
Connect the supply cable
10
to the mains
cable
11
.
Connect the mains cable
11
to the mains plug
6
.
Plug the mains plug
6
into a properly installed
socket.
14118502L
Unfold the floor lamp.
Install the base
5
by placing the metal plate
(base) onto the base plate (base).
Insert the screws
9
all the way through the
base
5
from below.
Use the two screws
9
to secure the tube to the
base
5
.
Position the light upright.
Adjust the lamp arms
3
on the light to the de-
sired position.
Adjust the lamp head
1
to the desired position.
Connect the supply cable
10
to the mains plug
6
.
Plug the mains plug
6
into a properly installed
socket.
Your light is now ready to use.
Switching the light on / off
Use the dimmer switch
2
on the lamp head
1
to switch the light on / off.
To dim the light, touch / press the dimmer switch
2
several times. This light has 4 dimmer set-
tings.
