6 GB/IE/NI
Introduction / Safety
Introduction
LED Floor Lamp
Introduction
Congratulations on your new product.
You have selected a high quality product.
Please be sure to carefully read the com-
plete operating instructions. Fold out the page with
the illustrations. These instructions are part of the
product and contain important information on setup
and handling. Always follow all safety instructions.
Before using this product for the first time verify the
correct voltage and that all parts are properly in-
stalled. Should you have any questions or you are
unsure about operating the product, please contact
the dealer or service centre. Please keep these in-
structions in a safe place and pass them on third
parties as applicable.
Intended use
This light is only suitable for indoor use
in dry and enclosed spaces.
This product is intended for private household
use only.
Scope of delivery
Check immediately after unpacking that the parts are
complete and that the product is in proper condition.
14118405L / 14118406L
1 LED floor lamp
1 Base
1 Connector (metal)
2 Screws
1 Power supply
1 Mains cable
1 Set of assembly instructions and instructions for use
14118502L
1 LED floor lamp
1 Base blat (base)
1 Metal plate (base)
2 Screws
1 Power supply
1 Set of assembly instructions and instructions for use
List of pictograms used
Please read the operating instructions!
For your safety
This light is only suitable for indoor
use in dry and enclosed spaces.
Caution - Hot surfaces!
Safety class II
Dispose of the packaging and
product in an environmentally-friendly
manner!
Observe the warnings and safety
notices!
+ -
Polarity
Short-circuit proof safety transformer
Separate control unit
Warning! Risk of electric shock!
