9
GB/IE/NI
Start-up / Maintenance and Cleaning / Disposal / Information
Safety / Preparation / Start-up
Adjusting the lamp head
Note:
The light must be switched off before adjust-
ing the lamp head
1
.
Allow the light to cool off completely.
Adjust the lamp head
1
to the desired position.
Note: 14118405L / 14118406L:
Tighten the wing bolt
12
if the lamp head
1
moves out of position.
Adjusting the lamp arm
Note:
only change the position of the lamp arm
3
if the light is switched off.
Allow the light to cool off completely.
Adjust the lamp arm
3
to the desired position.
Note: 14118405L / 14118406L:
Tighten the wing bolt
12
if the lamp arm
3
moves
out of position.
Maintenance and Cleaning
DANGER OF ELECTRIC
SHOCK!
First unplug the mains plug
6
from the
socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down
completely.
DANGER OF ELECTRIC
SHOCK!
For electrical safety, never clean the light
with water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Plug the mains plug
6
into the socket.
Disposal
The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at your
local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to the
product and to all components bearing this sym-
bol. Do not dispose of products bearing this sym-
bol in your normal household waste, but instead
they must be taken for recycling to a collection site
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and protects the environment.
Information
Warranty
You receive a 36 month warranty on this product,
valid from the date of purchase. The appliance has
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect arising during the warranty pe-
riod, please send the appliance to the listed Service
Centre address, making reference to the following
article number: 14118405L / 14118406L /
14118502L.
Wear parts (such as bulbs) and damage caused by
improper handling, non-observance of the operating
instructions or unauthorised interference are excluded
from the warranty. The performance of services under
the warranty does not extend or renew the warranty
period.
